Showing 346–360 of 450 results

  • Ray-Ran – 6MBA Advanced Melt Flow System

    The 6MBA is the basic model offered within the Ray-Ran Range of Melt Flow Indexers. The manually operated test procedure is very simple to undertake. Molten Polymer is extruded through a closely controlled orifice (die) from the apparatus using pr...

    The 6MBA is the basic model offered within the Ray-Ran Range of Melt Flow Indexers. The manually operated test procedure is very simple to undertake. Molten Polymer is extruded through a closely controlled orifice (die) from the apparatus using pre set conditions of temperature and pressure produced by a dead weight system. The extruded polymer is cut off manually and is then weighed. Using the time interval to extrude the polymer its flow rate over 10 minutes can easily be determined, thus giving the Melt Flow Index (MFI) or Melt Mass Flow Rate (MFR) in g/10 min. By conducting a simple Density Test at test temperature on the same material using the same pre set conditions and a known piston travel distance the Melt Volume Rate (MVR) can also be determined.

    Read moreDone

  • Ray-Ran – 6MPCA Advanced Melt Flow System

    The 6MPCA is the most advanced model offered within the Ray-Ran Range of Melt Flow Indexers. The operating procedure is very simple to undertake using its on board advanced microprocessor technology. The large liquid crystal display (LCD) provides...

    The 6MPCA is the most advanced model offered within the Ray-Ran Range of Melt Flow Indexers. The operating procedure is very simple to undertake using its on board advanced microprocessor technology. The large liquid crystal display (LCD) provides simple on screen instructions reducing user error and the test parameters are easily entered via the alpha numeric membrane keypad. The apparatus can accurately determine results for MFR, MVR and Density at test temperature.

    Read moreDone

  • Ray-Ran – Advanced Universal Pendulum Impact Tester

    The Ray-Ran Advanced Universal Pendulum Impact Tester utilises advanced microprocessor technology to determine the energy required to break or rupture specimens such as plastics, composites, ceramics and non ferrous metals to International testing methods for Izod, Charpy and Tension Impact Testing.

    To calculate the impact energy, the apparatus uses advanced and highly accurate rotary encoder technology to record the lost angle of the hammer after impacting a test sample against the angle recorded after calibrating the hammer. The resulting lost angle is calculated as the test sample’s impact energy by the advanced microprocessor system.

    The apparatus is supplied as standard with Ray-Ran’s Techni–Test Windows based PC software for connection to the apparatus via an RS232 or Ethernet connection. Test results can be printed directly from the Techni–Test software or can be saved and exported as .CSV files which can be opened with Microsoft Excel in tabular form which can be manipulated to your specific requirements such as preparing a graphical presentation or copying the results to a Word document for a report presentation if required.

    Read moreDone

  • Ray-Ran – Apparent Bulk Density Apparatus – ASTM D1895 Method A

    Bulk density apparatus is testing equipment used to measure the bulk density property of powder, granules and other “divided” solids, especially used in reference to mineral components (soil, gravel, sand), chemical substances, (pharma...

    Bulk density apparatus is testing equipment used to measure the bulk density property of powder, granules and other “divided” solids, especially used in reference to mineral components (soil, gravel, sand), chemical substances, (pharmaceutical), plastics like polyethylene (hdpe or mdpe) pvc, polystyrene etc, or foodstuff and any other masses of granular or particulate matter.

    The Method A tester is primarily used to measure the apparent density of fine granules that can be poured readily through a “V” shaped funnel, the material under test is allowed to flow into a cylindrical cup with a known volume of 100cm³.

    Read moreDone

  • Ray-Ran – Auto Density Measurement System

    The Auto Density Gradient Apparatus from Ray-Ran has become the world’s benchmark for accurate density measurement of small solid specimens using the column method. Offered as a 3 or 6 column version, the built-in on-board Microprocessor System ...

    The Auto Density Gradient Apparatus from Ray-Ran has become the world’s benchmark for accurate density measurement of small solid specimens using the column method. Offered as a 3 or 6 column version, the built-in on-board Microprocessor System accurately calculates the specimen’s density more quickly and more accurately by using the latest linear encoder technology that measures the samples position in the column relative to the calibrated glass marker floats. Once the correct position of the sample is recorded the density is displayed on the LCD screen.

    Read moreDone

  • RBC Bioscience – Automated Extraction Instruments – MagCore® Plus II

    MagCore® Plus II is the newest robotic bench-top workstation for a fast and high-yield nucleic acid purification from virtually all molecular diagnostic, biological, clinical and forensic sample types. With small footprint, light weight, user fri...

    MagCore® Plus II is the newest robotic bench-top workstation for a fast and high-yield nucleic acid purification from virtually all molecular diagnostic, biological, clinical and forensic sample types. With small footprint, light weight, user friendly interface, and a broad range of entirely built-in programs with free upgrades, 1-16 samples can be isolated simultaneously at your fingertip. The instrument simplifies your daily routine providing full traceability of kits and samples, through real-time mobile monitoring and a complete report that can be downloaded on a computer at the end of each run.

    Read moreDone

  • RBC Bioscience – Automated Nucleic Acid Extractor – MagCore® HF48

    MagCore® HF48 is a powerful system with consistent and simultaneous processing of 1st~24th or 24th~48th samples of DNA/RNA at A/B operation zones. It provides fast, cost-effective, and automated extraction purification of nucleic acids from diver...

    MagCore® HF48 is a powerful system with consistent and simultaneous processing of 1st~24th or 24th~48th samples of DNA/RNA at A/B operation zones. It provides fast, cost-effective, and automated extraction purification of nucleic acids from diverse sample types including whole blood, bacteria cells, plant cells, cultured cells, virus particles and tissues. With a sterilization system built-in, optimized protocols pre-programmed and magnetic bead-based reagent cartridges supplied, MagCore® HF48 provides users a fast, efficient and cross-contamination-free isolation of various DNA/RNA samples. Its superb processing capacity makes itself a perfect solution for high-capacity nucleic acid purification.

    Read moreDone

  • RBC Bioscience – Automated Nucleic Acid Extractor – MagCore® Super

    MagCore® Super is RBC Bioscience’s most advanced and efficient robotic workstation for nucleic acid extraction. It is the first platform combining EXTRACTOR and SPECTROPHOTOMETER. Users are benefited with automatic purification, OD values r...

    MagCore® Super is RBC Bioscience’s most advanced and efficient robotic workstation for nucleic acid extraction. It is the first platform combining EXTRACTOR and SPECTROPHOTOMETER. Users are benefited with automatic purification, OD values retrieval and final eluate concentration measurement. It is equipped with a colored touch screen, thermo printer, barcode scanner, USB flash p&p.

    Read moreDone

  • Stilla Technologies – Digital PCR – Naica 3 colors system

    Stilla® Crystal Digital PCR™ technology for absolute ­quantification of nucleic acids is based on ­cutting-edge microfluidic technology that ­integrates the digital PCR process in a single consumable, ...

    Stilla® Crystal Digital PCR™ technology for absolute ­quantification of nucleic acids is based on ­cutting-edge microfluidic technology that ­integrates the digital PCR process in a single consumable, ­reducing the hands-on time and interaction, so users can simply insert the sample and walk away.

    The sample is partitioned using a network of microchannels into a large array of individual droplets, also called a droplet crystal. Owing to the next-generation Crystal Digital PCR™ technology, the droplets partitioned are identical in size- ­yielding results you can trust. PCR then ­amplifies the ­fluorescent target in the droplets which can be read for ­absolute quantification the nucleic acids.

    With a combination of powerful imaging, the flexibility to use up to 3 detection channels, and a proprietary software for analysis, Crystal Digital PCR™ is designed to offer an unmatched level of confidence in the digital PCR ­measurement.

    Read moreDone

  • Stilla Technologies – Digital PCR – Naica 6 colors system

    The Naica® System

    Get absolute quantification of multiple genetic targets in a single run

    Digital PCR (dPCR) is a powerful tool ...

    The Naica® System

    Get absolute quantification of multiple genetic targets in a single run

    Digital PCR (dPCR) is a powerful tool used for the precise and highly sensitive quantification of nucleic acids.

    The naica® system is an easy-to-use dPCR platform that harnesses cutting-edge microfluidic technology to integrate the dPCR workflow onto a single consumable chip. The technology, known as Crystal Digital PCR™, partitions samples into a large array of thousands of individual droplet crystals – each its own reaction compartment – before amplifying nucleic acid molecules in each droplet crystal. These reactions are tagged with fluorophores to be read using up to six different fluorescence light channels.

    This makes for a fast and simple workflow that provides even more sensitivity while reducing time to results and saving precious sample.

    Read moreDone

  • Systech Illinois – O2 analyzer – OxySense 325i

    This base oxygen analyzer is used in conjunction with a computer interface and will perform most of the functions of the 5250i including non-invasive headspace analysis for packages, bottles and blister packs using the O2xyDot Sensor; package mate...

    This base oxygen analyzer is used in conjunction with a computer interface and will perform most of the functions of the 5250i including non-invasive headspace analysis for packages, bottles and blister packs using the O2xyDot Sensor; package material and design evaluation; closure design and evaluation; MAP production start up monitoring; research and development; QC and assurance, as well as product oxidation studies.

    The OxySense 325i is particularly ideal for smaller laboratories and companies considering bringing their oxygen testing requirements in-house for the first time and companies looking for a low-cost solution. With the new EasAlign Pen with integrated capture switch for a simple, one click, oxygen measurement. Multiple measurements can be provided over time on the same package offering accurate analysis through real time, real world measurements. Due to the measurement process used, the risk of sample contamination or leaks is eliminated.

    Read moreDone

  • Systech Illinois – O2 analyzer – OxySense 5250i

    The OxySense 5250i is the o2 analyzers instrument of choice for laboratories and individuals who need to test or evaluate packaging materials through a variety of studies. These studies include: non-invasive headspace analysis for packages, bottle...

    The OxySense 5250i is the o2 analyzers instrument of choice for laboratories and individuals who need to test or evaluate packaging materials through a variety of studies. These studies include: non-invasive headspace analysis for packages, bottles and blister packs using the O2xyDot Sensor; package material and design evaluation; closure design and evaluation; MAP production start up monitoring; research and development; QC and assurance, as well as product oxidation studies.

    For non-invasive measurements, oxygen concentration can be determined by placing the O2xyDot Sensor in the package or container prior to filling and sealing. Multiple measurements can be provided over time on the same package offering accurate analysis through real time, real world measurements. Due to the measurement process used, the risk of sample contamination or leaks is eliminated.

    This versatile instrument also has the capability to perform permeability analysis (OTR) on film, bottles and packages*.

    Read moreDone

  • Systech Illinois – O2 CO2 Tester, the headspace gas analyzer – Gaspace Advance

    This carbon dioxide (CO2) and oxygen (O2) headspace analyzer provides consistently reliable results and simplicity in operation allowing you to maximise your production efficiency. Its large buttons and clear display ensures te...

    This carbon dioxide (CO2) and oxygen (O2) headspace analyzer provides consistently reliable results and simplicity in operation allowing you to maximise your production efficiency. Its large buttons and clear display ensures testing is simple, errors are eliminated and no special operator training is required.

    Numerous packs can be tested quickly with just one button press, saving time and making Quality Assurance more efficient. These MAP analyzers can test all pack sizes and very low volumes.

    Rigid cans and jars can also be tested using the simple-to-use can piercing station which supports the cans and jars for accurate analysis using a standard needle probe. A 45° Adaptor is also available to aid measurement of small volumes of headspace.

    There are a variety of ways to perform analysis; Timed Tests, AutoSense, Peak/Valley, Syringe Direct Injection or Continuous Testing. Fast configuration and selection provides the test method which is best for you. Easy to see Pass and Fail messages speeds up the analysis process and removes any uncertainty with interpreting measurements.

    The Gaspace Data Manager software allows you to download results stored on your gas analyzer and upload new settings. You can also search through your stored data by time, date, user, production line or any of the product information.

    Read moreDone

  • Systech Illinois – Package Testers – TME BT Integra-Pack™

    The TME BT Integra-Pack© is a bench-top, highresolution (0.001 psig) test instrument with a small footprint and user-friendly ease of operation. Electronic pressure and flow controls provide precise and repeatable test conditio...

    The TME BT Integra-Pack© is a bench-top, highresolution (0.001 psig) test instrument with a small footprint and user-friendly ease of operation. Electronic pressure and flow controls provide precise and repeatable test conditions, while automatic and high flow output allow testing of large porous packages. Applications cover a range of flexible or rigid, porous and non-porous, open or sealed packages.

    Automatic or Manual Parameter Definition 

    The intelligent BT Integra-Pack will test any package in automatic mode, with no need to input test parameters. However, its sophisticated nature is combined with a manual mode that lets the user input parameters such as ramp rate control and back pressure drop sensitivity. This allows testing of special configurations or types of packages or perform specific research and datagathering activities.

    Icon-based, Touch-Driven Color Display

    The touchscreen color display provides easy, clear navigation through the wide variety of data handling and review screens. Clearly defined icons make it easy to choose test modes, move from automatic to manual test settings, view test results in numeric and/or graphical format, and securely handle accumulated data.

    Read moreDone

  • Systech Illinois – Water Vapor Permeation Analyzer – 7000

    Modular systems for precision water vapor permeabilty testing of packaging film barriers.

    The 7000 water vapor analyzer range utilises the sensitive and stable P2O5 sensor for absolute moisture measurem...

    Modular systems for precision water vapor permeabilty testing of packaging film barriers.

    The 7000 water vapor analyzer range utilises the sensitive and stable P2O5 sensor for absolute moisture measurement. These water vapor analyzers offer a wide measurement range of 0.002-1000 g/m²/day and precision temperature, humidity and flow control. Providing accurate and repeatable results for research and development testing of water transmission rate (wvtr) in both current and newly formulated packaging film materials and fast testing for Quality Control.

    All Systech Illinois analyzers are certified traceable to NIST. In addition, analytical performance is validated using NIST certified gases and NIST traceable films.

    A set of validation films and a spare P2O5 sensor comes as standard with all of our water vapor permeation analyzers.

    Read moreDone