• Designed to satisfy the needs of all LCMS analyzers on the market
• The PSA technology with molecular sieves, used in the NiGen series, are drastically reducing the O2 and H2O residual but also the HC presence in the air, offering an extremelly pure nitrogen output (phthalate-free)
• Built-in compressor oil free including 2 x 50 l. tanks for Compressed Air and Nitrogen
• Highly reliabile Air compressor with maintenance required only after 16,000 hours of work
• 2 gas outlets available: UHP Nitrogen and Oil Free Air

• UHP Zero Air perfect for NPD, FID, FPD
• Parallel connection up to 4 stacked generators with tower configuration
• Modular configuration
• Equipped with PSA dryer
• Able to feed up to 8 FIDs
• Platinum Palladium HC system for HCT integral removal < 0,1 ppm for an absolutely stable and disturbante free baseline
• Easy integration with Brezza series dedicated air compressor (AirComp)
• CPU with Touch Screen Display connectable with CAN-BUS to the generators (up to 32 units), allows the monitor of the operational status, menus with report alarms and functioning parameters. The CPU include also an Ethernet output for the connection to PCs

LeNeo fusion instrument is automatic and it has one fusion position. It is ready to use right out of the box since it is small, compact and easy to install. Its safety door is locked during the entire fusion process. It protects against heat and the automated pouring avoids the manipulation of hot vessels, thus enhancing the operator’s safety. With LeNeo instrument, optimum uptime and quick return on investment (ROI) is guaranteed.

The fact that this fusion instrument allows the easy loading of crucibles, molds and beakers, that it has over ten preset fusion programs and that is ready to use right of the box without any training makes it really easy to use. LeNeo fusion instrument is also known to enhance security for the operator since its safety door automatically locks to protect him against heat. The fully automated pouring avoids the manipulation of hot vessels.

LeNeo fusion instrument helps obtaining superior analytical performances as well as accurate and precise results. Its programmable fusion parameters ensure high fusion success rate.

DKSH is the exclusive distributor in Cambodia, Laos, Malaysia, Philippines, Singapore, Thailand and Vietnam.

The M4 fusion instrument is fully automatic and it can process three samples at a time. This instrument prepares up to 12 glass disks or 24 borate solutions per hour. It leads to superior analytical results since all of its fusion parameters can be modified and because it guarantees high reproducibility. Other benefits of using the M4 instrument include its low maintenance cost, its automatic spark ignition and the fact that it requires no calibration, compressed air or oxygen to operate.  

DKSH is the exclusive distributor in Cambodia, Laos, Malaysia, Philippines, Singapore, Thailand and Vietnam.

The rFusion station is an automated modular system that doses, mixes and fuses samples to prepare them for XRF analysis. It is divided into two parts: a weighing station including TheAnt™ automatic doser and a fusion station equipped with two M4™ fusion instruments. This automated station provides our customers with a great ROI by maximizing productivity, by improving analytical results and by having a fast commissioning time.

 

DKSH is the exclusive distributor in Cambodia, Laos, Malaysia, Philippines, Singapore, Thailand and Vietnam.

TheOx Advanced fusion instrument is highly productive. It has six fusion positions and it can prepare from 24 to 30 fusions per hour. It delivers fast fusion temperature ramp ups for shorter fusion cycles and an increased sample throughput. This automatic instrument is equipped with long-lasting components that allow it to withstand heavy workloads and harsh work environments.

DKSH is the exclusive distributor in Cambodia, Laos, Malaysia, Philippines, Singapore, Thailand and Vietnam.

The Eagon 2 instrument is completely automatic. It has two independent fusion positions that can work synchronously or asynchronously to increase productivity. This fusion instrument guarantees the operator’s safety and cold-to-cold operation. The interlocked doors protect the operator against hot materials and surfaces during the entire fusion process. With its wide choice of predefined fusion methods and its one-touch operation feature, the Eagon 2 instrument is easy to use.

DKSH is the exclusive distributor in Cambodia, Laos, Malaysia, Philippines, Singapore, Thailand and Vietnam.

ColdBlock™ Sample Digestion System is the first sample digestion technology using focused short-wave infrared (IR) radiation and a ColdBlock, which delivers exceptional performance even in difficult matrices. Digestion of refractory chromite takes 10 minutes without any requirement of perchloric and hydrofluoric acids.

The PAL System is one of the most widely used and successful sample preparation and handling platforms. PAL System is your tool box for sample preparation, from a simple liquid injection to complete workflows. A PAL System can be adapted or extended to meet almost any requirements.

More than 50’000 users in gas and liquid chromatography, mass spectrometry and optical spectroscopy can’t be wrong.

Full Spectrum Flow Cytometry for All

The Cytek Northern Lights is a full spectrum flow cytometer that shifts the paradigm in what scientists expect to see in performance from an affordable one-to-three laser system. Cytek Northern Lights incorporates the same groundbreaking technologies as the Aurora system, allowing for a wide array of new fluorochrome combinations without reconfiguring your system for each application. The Northern Lights, with its easy-to-use workflow is the highly valuable full spectrum flow solution for everyday research applications.

Key Features

• High Value

Upgradeable from one laser and nine colors to three lasers and 24 colors, there is a Northern Lights configuration to fit your needs

• Remarkable Sensitivity

​Sensitivity redefined using state-of-the-art optics and low-noise electronics

• Easy, Flexible, and Intuitive

One configuration for all assay, use any commercially available fluorochrome, intuitive software

• Low Cost of Ownership

​Use fewer lasers to run more colors for greater cost savings and less setup time between experiments

A prodigy that’s taking flow cytometry to the next level of performance and flexibility

The Cytek Aurora leverages full spectrum technology to provide unprecedented flexibility to scientists, enabling the use of a wide array of new fluorochrome combinations without reconfiguring the system for each application. The Aurora system delivers high-resolution data at the single-cell level to resolve the most challenging cell populations, such as cells with high autofluorescence or low levels of expression of key biomarkers, regardless of assay complexity.

 

Key Features

 

• Up to 40 colors

Demonstrated including fluorochromes with emission spectra in close proximity to each other.

• Exceptional Sensitivity

Sensitivity redefined using state of the art optics and low noise electronics.

• A New Level of Flexibility

No changing optical filters for any fluorochrome. Use any commercially available fluorochrome excited by the onboard lasers.

The Cytek Aurora CS was designed to leverage the paradigm-shifting technology onboard the Cytek Aurora system and deliver the sorting capabilities you have come to expect in a high-end sorter.

Like Aurora, the CS provides the benefits of Full Spectrum Profiling (FSP™) technology. Its optical design and unmixing algorithm provide scientists remarkable flexibility, enabling the use of a wide array of new fluorochrome combinations without reconfiguring the system for each application. The state-of-the-art optics and low-noise electronics provide high-resolution, high-content and high sensitivity.

The result is a system that delivers high resolution at the single cell level to resolve the most challenging cell populations, such as cells with high autofluorescence or low levels of expression of key biomarkers, regardless of assay complexity, and to isolate live cells for downstream studies.

 

Key Features

 

• So Many Colors

Up to 40 colors demonstrated including fluorochromes with emission spectra in close proximity to each other.

• Exceptional Sensitivity

Sensitivity redefined using state of the art optics and low noise electronics.

• A New Level of Flexibility

No changing optical filters for any fluorochrome. Use any commercially available fluorochrome excited by the onboard lasers.

• Seamless Sorting

Transfer assays with ease, experience automated drop delay, clog detection, sort monitoring, and sort reporting.

CE certified, these Chillers are ideal for wide-range reaction systems and evaporators. The digital PID control system allows for superior temperature accuracy.